Edwards Vacuum Pump RV8 6 cfm NEW A65401906 115V 1PH
Request a Quote
OIL : .8 QT / .75L
Additional information
| Weight | 75 lbs |
|---|---|
| New / Rebuilt | |
| Level of Vacuum | MEDIUM VACUUM is from atmospheric pressure (760 torr) to 1 x 10E-3 Torr |
| CFM / L/M (Displacement) | |
| Inlet / Exhaust | |
| Motor | |
| Power | 115V, 60Hz,1 Ph with N. Amer. 115V Plug Other Options Available |
Description
All high vacuum pumps rebuilt and sold through AVAC have been completely disassembled, cleaned, re-machined and carefully inspected for wear by our factory trained technicians. Units are assembled with new vanes, shaft seals, exhaust valves, gaskets, springs, oil distribution valves and bearings prior to undergoing an extended performance test to meet or exceed OEM specifications. All pumps are then painted, detailed, and pass a final quality assurance inspection prior to shipping. A final test certificate is provided with each pump, which will be covered with a one-year warranty.
To meet the requirements for high throughputs with low ultimate vacuum, Edwards has developed a totally new concept in rotary vacuum pumps: The world's first dual-mode pump.
The unique dual-mode action allows you to easily configure the unit to pump very high gas loads and also achieve excellent vacuum - all from a single pump. In most cases it increases performance at significantly reduced noise levels.
This unique performance is matched by innovative design features including a cartridge based pumping mechanism incorporating advanced new materials, a fully featured Edwards motor and a fast acting inlet valve to seal the pump for suck-back protection.
The pumps are easy to install, use and maintain with superior built quality to give lowest cost of ownership. To build a pump this advanced, Edwards has invested heavily in state-of-the-art manufacturing and assembly technology in a dedicated ISO9001 factory.
Edwards RV - easy to install, use and maintain
Installation is easy as all Edwards RV pumps feature a special dual voltage, dual frequency motor with an IEC mains input socket. Simply plug in the appropriate cable. No need for hard wiring. An on/off switch controls the pump.
The motor voltage is determined by a simple rocker switch, enabling the pump to be easily configured for use internationally.
All controls are clearly marked and have large finger grips for ease of use. Inlet and outlet are both fitted with standard NW25 flanges.
- Selectable dual mode
- High vacuum for best pressure
- High throughput mode for continuous inlet pressure above 50 mbar
- Easy to use gas ballast
- ON-OFF switch on pump
- Low Noise Level: 48 dbA
- All pumps factory tested and certified
- Easy to service and maintain
Edwards Vacuum Pump RV8 6 cfm NEW A65401906 115V 1PH Specifications
| Specifications | Hz | Units | RV 8 | |
| VACUUM DATA | ||||
| Peak pumping speed | 60 | cfm | 5.9 | |
| 50 | m3/h | 8.5 | ||
| Ultimate pressure (Total) | 60 | Torr | 1.5 x 10-3 | |
| 50 | mbar | 2.0 x 10-3 | ||
| Ultimate pressure GB I (Total) | 50/60 | Torr | 2.3 x 10-2 | |
| - | mbar | 3.0 x 10-2 | ||
| Ultimate pressure GB II (Total) | 50/60 | Torr | 4.6 x 10-2 | |
| - | mbar | 6.0 x 10-2 | ||
| High throughput mode | 50/60 | Torr | 2.3 x 10-2 | |
| - | mbar | 3.0 x 10-2 | ||
| Water vapor tolerance | - | Torr | 38 | |
| - | mbar | 60 | ||
| Water vapor capacity - GB I | - | g/h | 60 | |
| Water vapor capacity - GB II | - | g/h | 220 | |
| MOTOR DATA | ||||
| Motor rating 1 phase (nominal) | 60 | W | 550 | |
| 50 | W | 450 | ||
| Motor rating 3 phase | - | W | - | |
| Nominal rotation speed | 60 | rpm | 1800 | |
| 50 | rpm | 1500 | ||
| PHYSICAL DATA | ||||
| Weight | - | lb | 57 | |
| - | kg | 26 | ||
| Length | - | inch | 18.5 | |
| - | mm | 470 | ||
| Width | - | inch | 6.2 | |
| - | mm | 158 | ||
| Height | - | inch | 8.9 | |
| - | mm | 225 | ||
| Oil capacity | - | liters | 0.75 | |
| Inlet flange | - | - | NW25 | |
| Exhaust flange | - | - | NW25 | |
| Noise level | 50 | dBA | 48 | |
| Operating temperature range | - | °C | 12 to 40 | |
