Edwards Scroll Pump NXDS10i 6.7 CFM 1ph 115/230V REBUILT W/ 1 Year Warranty A73601983
$6,820.00
Additional information
Weight | 65 lbs |
---|---|
New / Rebuilt | |
Type | |
Level of Vacuum | Medium Vacuum: Atmospheric Pressure (760 torr) to 1 x 10E-3 Torr |
CFM / L/M (Displacement) | |
Inlet / Exhaust | |
Motor | |
Power Options | Voltage 115V 1ph 50/60 hz +$0, Voltage 230V 1ph 50/60 hz +$0 |
Description
All vacuum pumps rebuilt and sold through AVAC have been completely disassembled, cleaned, re-machined and carefully inspected for wear by our factory-trained technicians. Units are assembled with new tip seals, shaft seals, and bearings and then undergo an extended performance test to meet or exceed OEM specifications. The unit will then be painted, detailed, and pass a final quality assurance inspection prior to shipping. The final test certificate will be provided with the unit, which will be covered with a one-year warranty.
The Edwards NXDS 10i oil-free scroll pump is a reliable workhorse. With years of field experience and more performance hours than most competitors, the NXDS scroll pumps are the premium choice for clean pumping technology.
The nXDS pumps use an innovative bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases
nXDS improves on the original XDS 5 and 10 pump technology by offering increased range of pumping speeds, combined with lower ultimate pressures, low power consumption and reduced noise. The gas ballast allows for pumping of condensable vapours, including water, solvents, dilute acids and bases. nXDS pumps feature the very latest in tip seal technology, giving a significantly longer life between tip seal changes.
Edwards Scroll Pump NXDS10i 6.7 CFM 1ph 115/230V REBUILT W/ 1 Year Warranty A73601983 Specifications
Nominal rotational speed | 1800 rpm |
Displacement | 12.7 m3h-1 / 7.5 ft3min-1 |
Peak pumping speed | 11.4 m3h-1 / 6.7 ft3min-1 |
Ultimate vacuum (total pressure) | 0.007 mbar / 0.005 Torr |
Minimum standby rotational speed | 1200 rpm |
Speed control resolution (percentage of full rotation speed) | 1% |
Pumping speed at minimum rotational speed | 7.5 |
Maximum continuous inlet pressure | 200 mbar |
Motor power 1-ph | 280 W |
Power connector 1-ph | IEC EN60320 C13 |
Recommended fuse | 10A, 250Vac rms |
Weight | 25.8 kg / 57 lb |
Inlet flange | NW25 |
Exhaust flange | NW25 |
Noise level | 52 dB(A) |
Vibration at inlet flange | < 4.5 mms-1 (rms) |
Leak tightness (static) | < 1x10-6 mbar ls-1 |
Operating temperature range | 5 to 40 °C / 41 to 104 °F |