Leybold Vacuum Pump D16A 14.1 cfm REBUILT w/ 1 Year Warranty
$1,699.00
Additional information
| Weight | 95 lbs |
|---|---|
| Dimensions | 26 × 14 × 14 in |
| New / Rebuilt | |
| Level of Vacuum | |
| CFM / L/M (Displacement) | |
| Inlet / Exhaust | |
| Motor | |
| Voltage | 115V, 60Hz,1 Ph with N. Amer. 115V Plug Other Options Available |
Description
LEYBOLD TRIVAC PUMPS
Leybold TRIVAC B vacuum pumps are designed for reliability and long service-life in mind. Directly linked to the motor via an elastic coupling element to ensure that the pump runs evenly and smoothly. With a type B 14 flanged motor screwed to the housing of the coupling. All pumps include a gas ballast valve as well as an inner section which may be exchanged without special tools or any special knowledge.
Trouble-free operation even at 1000 mbar intake pressure is ensured by a built-in oil pump, providing force-feed lubrication of the bearings from where a minimum amount of lubricant is fed to the compression and expansion chambers to ensure lubrication of the sliding vanes.
To minimize surface corrosion all components are protected by eliminating non-ferrous metals. The oil box, intake and exhaust line are made of aluminum and only solvent-resistant sealing materials are employed.
Special features
- Environment-friendly
- Low noise
- Low vibration
- Modern vacuum technology
- High pumping speed right down to the ultimate pressure
- Low ultimate pressure, even with gas ballast
- High water vapor tolerance
- Continuous operation right up to 1000 mbar
- Built-in oil pump, force-feed lubrication sliding bearing
- Minimal inherent air intake
- Compact, air cooled
- Handy, retractable handle
- All controls and oil level check on the front side
- Either horizontal or vertical intake and exhaust port
- Pressure-controlled anti-suckback valve
- Shaft seals and O-rings are all made of elastomer FPM
