Leybold Vacuum Pump D8B 6.9 cfm NEW 140082 1PH
Request a Quote
Additional information
| Weight | 55 lbs |
|---|---|
| New / Rebuilt | |
| Level of Vacuum | |
| CFM / L/M (Displacement) | |
| Inlet / Exhaust | |
| Motor | |
| Power Options | Voltage 115V 1ph 50/60 hz +$0, Voltage 230V 1ph 50/60 hz +$0 |
Description
LEYBOLD TRIVAC PUMPS
Leybold TRIVAC B vacuum pumps are designed for reliability and long service-life in mind. Directly linked to the motor via an elastic coupling element to ensure that the pump runs evenly and smoothly. With a type B 14 flanged motor screwed to the housing of the coupling. All pumps include a gas ballast valve as well as an inner section which may be exchanged without special tools or any special knowledge.
Trouble-free operation even at 1000 mbar intake pressure is ensured by a built-in oil pump, providing force-feed lubrication of the bearings from where a minimum amount of lubricant is fed to the compression and expansion chambers to ensure lubrication of the sliding vanes.
To minimize surface corrosion all components are protected by eliminating non-ferrous metals. The oil box, intake and exhaust line are made of aluminum and only solvent-resistant sealing materials are employed.
Special features
- Environment-friendly
- Low noise
- Low vibration
- Modern vacuum technology
- High pumping speed right down to the ultimate pressure
- Low ultimate pressure, even with gas ballast
- High water vapor tolerance
- Continuous operation right up to 1000 mbar
- Built-in oil pump, force-feed lubrication sliding bearing
- Minimal inherent air intake
- Compact, air cooled
- Handy, retractable handle
- All controls and oil level check on the front side
- Either horizontal or vertical intake and exhaust port
- Pressure-controlled anti-suckback valve
- Shaft seals and O-rings are all made of elastomer FPM
Leybold Vacuum Pump D8B 6.9 cfm NEW 140082 1PH Specifications
| 50 Hz | 60 Hz | ||
| Nominal pumping speed 1) | m3 x h-1 (cfm) | 9.7 (5.7) | 11.6 (6.9) |
| Pumping speed 1) | m3 x h-1 (cfm) | 8.5 (5) | 10.2 (6) |
|
Ultimate partial pressure without gas ballast 1) |
mbar (Torr) |
10-4 (0.75 x 10-4) |
10-4 (0.75 x 10-4) |
|
Ultimate total pressure without gas ballast 1) |
mbar (Torr) |
< 2 x 10-3 (< 1.5 x 10-3) |
< 2 x 10-3 (< 1.5 x 10-3) |
|
Ultimate total pressure with gas ballast 1) |
mbar (Torr) | < 5 x 10-3 (< 3.8 x 10-3) | < 5 x 10-3 (< 3.8 x 10-3) |
| Water vapor tolerance 1) | mbar (Torr) | 25 (18.8) | 25 (18.8) |
| Water vapor capacity | g/h | 157 | 157 |
| Oil filling, min. / max. | l (qt) | 0.3 / 0.9 (0.3 / 0.95) | 0.3 / 0.9 (0.3 / 0.95) |
|
Noise level 2) to DIN 45 635, without / with gas ballast |
dB(A) |
50 / 52 |
50 / 52 |
| Admissible ambient temperature | °C (°F) | 12 - 40 (54 - 104) | 12 - 40 (54 - 104) |
| Noise level 2) | W (HP) | 370 (0.50) | 370 (0.50) |
| Nominal speed | rpm | 1500 | 1800 |
| Type of protection 3) | IP | 54 | 54 |
| Weight 2) | kg (lbs) | 21.2 (46.7) | 21.2 (46.7) |
| Connections, Intake and Exhaust | DN | 16 KF | 16 KF |
