Helium Leak Detectors & Accessories
Helium Leak Detectors
Since 1969 A-VAC has specialized in sales and service of world renowned Alcatel Adixen Pfeiffer, and Leybold Oerlikon brands of Helium Leak Detectors and Mass Spectrometers as well as accessories for Varian Agilent, BOC Edwards, and more.
Filaments, sources, leak standards, sniffer probes, turbo pumps and replacement vacuum pumps are all in stock to keep your leak detector up and running. We offer-
- Helium Leak Detectors by Adixen for Pfeiffer
- Helium Leak Detectors by Leybold Oerlikon
- Leak Standards
- Rebuilding Services
- Sniffer Probes
- Repair Parts
We are the leading Authorized Distributor of Helium Leak Detectors manufactured by Alcatel Adixen Pfeiffer, Leybold Oerlikon.
Since leak detection and prevention is a critical part in industrial, medical, aerospace and other related industries, reliability and accuracy plays a critical part while selecting the detectors or helium leak sniffers. A-VAC offers a wide range of equipment to insure reliable, repeatable, high quality testing for years to come.
Who chooses A-VAC for Quality Helium Leak Detectors?
Air Products, Monsanto,, Lockheed Martin, Zodiac Aerospace, Northrop Grumman, Mallinckrodt, Viewray, Texas Tech, Covidien, Honeywell, GKN Aerospace, Praxair, Naval Research Laboratory, Qimaging, Setpoint Medical, The Bernd Group ,Adagio Medical, and more..
Helium Leak Detector uses:
The leak testing equipment along with helium leak sniffers and helium mass spectrometers are instruments that are used for detecting and locating small leaks. Originally developed by the Manhattan Project, helium leak detectors find microscopic leaks for a variety of industries, including medical, automotive airbag, road wheel, vacuum systems, hermetic seal verification, etc.
A helium leak detector makes use of a vacuum chamber comprising a sealed, helium- filled container. If Helium leaks out of the container, the mass spectrometer detects the leakage as well as the rate at which the leakage occurs.
Design of a helium leak detector
As an extension in the method of detecting trapless helium leaks, counterflow helium leak detectors have a blueprint that is in perfect accordance with the schematic diagram displayed in the below figure. The mass spectrometer (entitled MS in the diagram below) is mounted on the flange of the turbomolecular pump that is meant for intake. Another pump ( Sv ), is used to evacuate the turbomolecular pump via the valve marked as V2.
The workpiece marked 1 in the diagram is evacuated via the open valve (V1) that is present in the connection of the test gas. The two valves, V1 and V2 are interconnected in a manner so as to prioritise the building of vacuum pressure in the turbo pump over the evacuation of workpiece 1. Once it has been evacuated, it is safe to reconnect it to a backing pump, or a tap that is present in the turbomolecular pump by using the valve that has been marked as V3. Once the optimum pressure levels have been attained, helium can be sprayed externally onto the workpiece, which, in combination with ambient air, penetrates the leaks of the workpiece. The helium that is present in the residual gas circulates in a direction that counters the directional flow within the two valves, and travels via the turbopump, to finally reach the mass spectrometer (MS), where the leak is ultimately detected. The turbopump has separate compression ratios for air and helium, and the mutual difference varies by multiple powers of ten. The turbopump, with its high compression-ratio helps to deviate air from the mass spectrometer, while the helium gas is partially pressurized. The pump thus functions to selectively amplify helium.
This is how the mass spectrometer facilitates the detection of helium leaks in workpieces that have pressures lower than 1 mbar. Helium gas can be pressurized at differing powers of ten, and leakage rates ranging between 10 and 10-8 mbar l / s can be detected by using various taps that are located at different places on the turbopump (V3), and also by operating it at varying speeds that can exponentially influence the overall compression ratio. It is necessary to attain a pressure in the range of 10-3 mbar to help the detector to achieve the highest point of sensitivity and effectiveness. This can be done by using the inlet V3.
The mass spectrometer generally operates at extremely low pressure levels owing to the upstream pressure of the turbopump. This provides adequate protection to the detector from all risks of damage or contamination.